|
|
 |
| |
| CLEANING
SYSTEMS |
Perfect
cleaning is a key to better finish, and perfect plating.
Our cleaning systems are designed to remove dust, oil,
grease, flux, buffing compounds, carbon, scales, rust,
water marks etc.
| USAGES: |
|
•
|
Bearing
Industry |
|
•
|
PCB
& Electronic Industry |
|
•
|
Real
and Imitation Jewellery |
|
•
|
Electroplating
Industry |
|
•
|
Pressed
Component Industry |
|
•
|
Watch
& Watch components, Watch Straps |
|
•
|
Automobile
and allied Industry |
|
•
|
Surgical
goods Industry |
|
•
|
Spectacle
Frames |
|
•
|
Ball
Point & Pen Industry |
|
| The
following types of Systems are available. |
|
|
SINGLE
STAGE ULTRASONIC CLEANING SYSTEM
|
 |
|
METHOD
|
|
Appropriate liquid is poured
in the tank for removing specific contamination.
Heating if desired also incorporated. The
job is loaded on jigs. Fixtures, Wire, Baskets
or any other convenient method and immersed
in tank for prescribed time. Single stage
Ultrasonic Cleaning system is useful with
Neutral or Alkaline liquid. Acidic solution
to be used with special arrangements.
|
|
|
|
|
MODELS
|
ULTRASONIC
TANK SIZE IN INCH
|
CAPCITY
(LITERS)
|
|
EUC
- 120
|
6
x 6 x 6
|
3
|
|
EUC
�0
|
9
x 6 x 4
|
3
|
|
EUC
�0
|
8
x 8 x 6
|
6
|
|
EUC
- 250
|
10
x 10 x 6
|
9
|
|
EUC
- 300
|
8
x 8 x 12
|
12
|
|
EUC
�0
|
15
x 12 x 10
|
28
|
|
EUC
�0
|
20
x 12 x 10
|
37
|
|
EUC
�00
|
24
x 15 x 15
|
84
|
|
EUC
- 1500
|
18
x 18 x 24
|
120
|
|
EUC
�00
|
20
x 20 x 30
|
187
|
|
EUC
- 2500
|
20
x 20 x 34
|
212
|
|
|
| |
| MULTI
STAGE ULTRASONIC VAPOUR DEGREASING SYSTEM |
| Multi-stage
ultrasonic cleaning system may contain following
stage. |
|
•
|
Water
based ultrasonic tank. |
|
•
|
Water
based Swill tank. |
|
•
|
Alkaline
solution based ultrasonic tank. |
|
•
|
Water
based ultrasonic tank. |
|
•
|
Water
based Swill tank. |
|
•
|
Vapour
designing chamber. |
|
•
|
Acidic Solution based ultrasonic tank. |
| FEATURES
: |
|
•
|
Non
朣tandard models also built. |
|
•
|
Stainless
Steel 316/ 304 grade 16 /18 gauge construction. |
|
•
|
Thermostatic
control on heaters. |
|
•
|
Compact
model with generators and tank in one cabinet
also offered |
|
•
|
Cabinet
panels powder coated. |
|
•
|
Transducers
attached welded type |
|
•
|
Material handling facility � optional. |
|
| |
|
 |
|
ULTRASONIC
2 STAGE DEGREASERS.
|
|
This consists of two chambers
such as ultrasonic chamber and vapour degreasing
chambers. Degreasing solvent is poured in
both the chambers and electrically heated.
The temperature is arrested by thermostats.
The job is loaded on basket of fixture and
immersed in ultrasonic chamber for ultrasonic
cleaning and then transferred to vapour
degreasing chamber.
|
|
ULTRASONIC
3 STAGE DEGREASERS.
|
|
When degree to contamination
is more and heavy production is desired,
third chamber as pre-cleaning chamber is
necessary. The degreasing solvent remains
same for all the three chambers. Solvent
is electrically heated. The job is loaded
on baskets or future and immersed in pre-cleaning
chamber first and subsequently in other
two chambers.
|
|
| |
|
| TRICHLOROETHYLENE
METAL DEGREASING PLANT |
 |
|
The equipment consists of
HEATING ZONE, VAPOUR ZONE, AND CONDESING
ZONE.
The main tank is fabricated from M.S. Plate,
and is metallized with metal zinc inside,
the outside surface of heating zone, and
vapour zone is insulated with insulating
materials covered with M.S. Sheets.
The heating zone is provided with bottom
heaters to transfer the heat efficiently.
A quick opening main hole is provided at
the bottom lid with drain valve.
The condensing zone is provided with water-cooling
coils made of copper pipes with inlet. A
water cooling Jacket is also provided on
the outside to get the efficient condensation
of the vapour. A condensate collecting trough
is provided to catch the condensate, and
deliver the same to the water separator.
|
|
|
A water separator is provided
to separate the water from the condensed
solvent and to return the pure solvent to
the heating zone. A separate valve is provided
to collect the condensate outside, when
the solvent is distilled.
A control panel is provided consisting of
automatic thermostatic controls for heating
zone as well as OFF the whole plant.
A control panel consists of magnetic contactor,
isolator with fuses main indicating lamps
and complete with internal wiring. The electric
supply is required of 400- 440 volts, 3
phase A.C. supply.
All the interconnecting piping, valve, etc.
are provided. A lid is provided to cover
up the top, when the plant is idle.
EXHAUST SYSTEM CONSISTS OF � M.S.
double ducting, M.S. condensing chamber
with Exhaust fan can be provided at an extra
cost.
|
|
|
| |
|
|
