Home About Us Products Exports Electrocoat Feedback Contact Us

Products

  
Polishing Equipments
Cleaning Systems
Tanks
Electroplating Barrels
Filter Units
Air Agitation Units
Rectifiers
Dryer Units
Electrophoretic Lacquer Coating Plant
Laboratory Equipments & Instruments
Titanium Products
Accessories
Polishing Consumables
CED Coating Plants & Processes
Heat Transfer Wood Finishes
Water Transfer Printing
 
TITANIUM PRODUCTS
TITANIUM ANODE BASKETS

These baskets are made of Titanium sheet, suitably welded. The front and backside have expanded Titanium mesh. They are fitted with Titanium hook. The basket is primarily for use in Nickel Plating tanks in conventional Plating shops as well as in ABS plating and electroforming plants. Standard ranges are as follows:

 

 
LENGTH
THICKNESS
HEIGHT
4.5”
1”
6”, 9”, 12”, 18”, 24”, 30”, 36’, & higher
6”
1”
6”, 9”, 12”, 18”, 24”, 30”, 36’, & higher
6”
2”
6”, 9”, 12”, 18”, 24”, 30”, 36’, & higher
10”
1”
10” & higher
12”
1”
12”, 18”, 24”, 30”, 36’, & higher
12”
2”
12”, 18”, 24”, 30”, 36’, & higher

 
Horizontal baskets as per customer’s specification can also be fabricated.

The standard baskets are having hook length of 4 to 5 inches.

Approx, weight of Nickel that can be loaded = 1.34 kgs/inch of ‘S’ Nickel or = 1.1 kgs/ inch of Ni. sq. in basket.

Round and different shaped baskets can also be supplied as per your Drawings.
TITANIUM being an inert metal & a good conductor of electricity transfers 100% of electric current from bus bar to Electrolytes giving maximum efficiency.

Salient Features:
1) It is fabricated from 99.5% pure Titanium used for plating purpose.
2) Titanium baskets are made of highly rigid construction and expanded mesh has been provided for the easy flow of electrolyte. Baskets are fitted with plain or twister hooks.
3) Reinforcing strips are welded for better durability. Also bottom and sides of all the baskets are formed to a channel section of suitable thickness to carry necessary weight anodes.
4) Plain or twisted hooks are fully wielded to basket’s body to fit snugly on bus bars to avoid any current loss.
5) High corrosion resistance to all electrolytes ensures longer life of coils & baskets.
   
TITANIUM COILS
Titanium coils are normally made from 1” O.D. Titanium Pipe. It can be supplied in various Shapes as per customer requirement. Typical Applications are as a Cooling Coil in Acid Zinc, Acid Copper and also Hard Chrome Baths.

 

© 2006 E-Mech Enterprises  (India) Pvt. Ltd.  All rights reserved. Powered by : Siddhi Enterprise